Influence of lunar phases,winds and seasonality on the stranding of mesopelagic fish in the Strait of Messina (Central Mediterranean Sea)          下载免费PDF全文

Pietro Battaglia  Giovanni Ammendolia  Mauro Cavallaro  Pierpaolo Consoli  Valentina Esposito  Danilo Malara  Ignazio Rao  Teresa Romeo  Franco Andaloro 《Marine Ecology》2017,38(5)

The shore stranding of mesopelagic fauna is a recurrent phenomenon in the Strait of Messina (Central Mediterranean Sea). The aim of this paper is to test the influence of lunar phases, winds and seasons upon the frequency of occurrence of strandings of mesopelagic fish. Species abundance in relation to these factors was quantified for the first time. Specimens were collected stranded on the shore along the Sicilian coast of the Strait of Messina between 2008 and 2016. Overall 32 species belonging to seven families (Gonostomatidae, Microstomatidae, Myctophidae, Paralepididae, Phosichthyidae, Sternoptychidae, Stomiidae) were found stranded. Myctophidae was the family including the highest number of species (16), whereas Gonostomatidae was the most abundant in terms of total number of individuals (47.2%), mainly thanks to the species Cyclothone braueri. The moon, which influences the strength of currents (highest during full and new moon phases) and irradiance (higher in some lunar phases, such as the full moon), affected the abundance of stranded mesopelagic fish in the study area. The highest number of stranding events was recorded during the new moon: 34.6% of the total relative abundance of stranded mesopelagic fish. Wind blowing from the sea towards the coastline (southeasterly and easterly winds) created the best conditions for strandings. The highest abundance of stranded specimens was recorded during the winter season.  相似文献   

Uncertainty quantification of overpressure buildup through inverse modeling of compaction processes in sedimentary basins     

Ivo Colombo  Giovanni M. Porta  Paolo Ruffo  Alberto Guadagnini 《Hydrogeology Journal》2017,25(2):385-403

This study illustrates a procedure conducive to a preliminary risk analysis of overpressure development in sedimentary basins characterized by alternating depositional events of sandstone and shale layers. The approach rests on two key elements: (1) forward modeling of fluid flow and compaction, and (2) application of a model-complexity reduction technique based on a generalized polynomial chaos expansion (gPCE). The forward model considers a one-dimensional vertical compaction processes. The gPCE model is then used in an inverse modeling context to obtain efficient model parameter estimation and uncertainty quantification. The methodology is applied to two field settings considered in previous literature works, i.e. the Venture Field (Scotian Shelf, Canada) and the Navarin Basin (Bering Sea, Alaska, USA), relying on available porosity and pressure information for model calibration. It is found that the best result is obtained when porosity and pressure data are considered jointly in the model calibration procedure. Uncertainty propagation from unknown input parameters to model outputs, such as pore pressure vertical distribution, is investigated and quantified. This modeling strategy enables one to quantify the relative importance of key phenomena governing the feedback between sediment compaction and fluid flow processes and driving the buildup of fluid overpressure in stratified sedimentary basins characterized by the presence of low-permeability layers. The results here illustrated (1) allow for diagnosis of the critical role played by the parameters of quantitative formulations linking porosity and permeability in compacted shales and (2) provide an explicit and detailed quantification of the effects of their uncertainty in field settings.  相似文献   

Vegetation turnover in a braided river: frequency and effectiveness of floods of different magnitude          下载免费PDF全文

Nicola Surian  Matteo Barban  Luca Ziliani  Giovanni Monegato  Walter Bertoldi  Francesco Comiti 《地球表面变化过程与地形》2015,40(4):542-558

This work addresses the temporal dynamics of riparian vegetation in large braided rivers, exploring the relationship between vegetation erosion and flood magnitude. In particular, it investigates the existence of a threshold discharge, or a range of discharges, above which erosion of vegetated patches within the channel occurs. The research was conducted on a 14 km long reach of the Tagliamento River, a braided river in north‐eastern Italy. Ten sets of aerial photographs were used to investigate vegetation dynamics in the period 1954–2011. By using different geographic information system (GIS) procedures, three aspects of geomorphic‐vegetation dynamics and interactions were addressed: (i) long‐term (1954–2011) channel evolution and vegetation dynamics; (ii) the relationship between vegetation erosion/establishment and flow regime; (iii) vegetation turnover, in the period 1986–2011. Results show that vegetation turnover is remarkably rapid in the study reach with 50% of in‐channel vegetation persisting for less than 5–6 years and only 10% of vegetation persisting for more than 18–19 years. The analysis shows that significant vegetation erosion is determined by relatively frequent floods, i.e. floods with a recurrence interval of c. 1–2.5 years, although some differences exist between sub‐reaches with different densities of vegetation cover. These findings suggest that the erosion of riparian vegetation in braided rivers may not be controlled solely by very large floods, as is the case for lower energy gravel‐bed rivers. Besides flow regime, other factors seem to play a significant role for in‐channel vegetation cover over long time spans. In particular, erosion of marginal vegetation, which supplies large wood elements to the channel, increased notably over the study period and was an important factor for in‐channel vegetation trends. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Multiridge Euler deconvolution   总被引：1，自引：0，他引：1  

Giovanni Florio  Maurizio Fedi 《Geophysical Prospecting》2014,62(2):333-351

Potential field interpretation can be carried out using multiscale methods. This class of methods analyses a multiscale data set, which is built by upward continuation of the original data to a number of altitudes conveniently chosen. Euler deconvolution can be cast into this multiscale environment by analysing data along ridges of potential fields, e.g., at those points along lines across scales where the field or its horizontal or vertical derivative respectively is zero. Previous work has shown that Euler equations are notably simplified along any of these ridges. Since a given anomaly may generate one or more ridges we describe in this paper how Euler deconvolution may be used to jointly invert data along all of them, so performing a multiridge Euler deconvolution. The method enjoys the stable and high‐resolution properties of multiscale methods, due to the composite upward continuation/vertical differentiation filter used. Such a physically‐based field transformation can have a positive effect on reducing both high‐wavenumber noise and interference or regional field effects. Multiridge Euler deconvolution can also be applied to the modulus of an analytic signal, gravity/magnetic gradient tensor components or Hilbert transform components. The advantages of using multiridge Euler deconvolution compared to single ridge Euler deconvolution include improved solution clustering, increased number of solutions, improvement of accuracy of the results obtainable from some types of ridges and greater ease in the selection of ridges to invert. The multiscale approach is particularly well suited to deal with non‐ideal sources. In these cases, our strategy is to find the optimal combination of upward continuation altitude range and data differentiation order, such that the field could be sensed as approximately homogeneous and then characterized by a structural index close to an integer value. This allows us to estimate depths related to the top or the centre of the structure.  相似文献   

Spectral-element simulations of elastic wave propagation in exploration and geotechnical applications          下载免费PDF全文

Lin Zheng  Qi Zhao  Bernd Milkereit  Giovanni Grasselli  Qinya Liu 《地震科学（英文版）》2014,27(2):179-187

We apply the spectral-element method (SEM), a high-order finite-element method (FEM) to simulate seismic wave propagation in complex media for exploration and geotechnical problems. The SEM accurately treats geometrical complexities through its flexible FEM mesh and accurately interpolates wavefields through high-order Lagrange polynomials. It has been a numerical solver used extensively in earthquake seismology. We demonstrate the applicability of SEM for selected 2D exploration and geotechnical velocity models with an open-source SEM software package SPECFEM2D. The first scenario involves a marine survey for a salt dome with the presence of major internal discontinuities, and the second example simulates seismic wave propagation for an open-pit mine with complex surface topography. Wavefield snapshots, synthetic seismograms, and peak particle velocity maps are presented to illustrate the promising use of SEM for industrial problems.  相似文献   

Carbon dioxide degassing and thermal energy release in the Monte Amiata volcanic-geothermal area (Italy)   总被引：2，自引：0，他引：2  

Francesco Frondini  Stefano Caliro  Carlo Cardellini  Giovanni Chiodini  Nicola Morgantini 《Applied Geochemistry》2009

The quaternary volcanic complex of Mount Amiata is located in southern Tuscany (Italy) and represents the most recent manifestation of the Tuscan Magmatic Province. The region is characterised by a large thermal anomaly and by the presence of numerous CO₂-rich gas emissions and geothermal features, mainly located at the periphery of the volcanic complex. Two geothermal systems are located, at increasing depths, in the carbonate and metamorphic formations beneath the volcanic complex. The shallow volcanic aquifer is separated from the deep geothermal systems by a low permeability unit (Ligurian Unit). A measured CO₂ discharge through soils of 1.8 × 10⁹ mol a⁻¹ shows that large amounts of CO₂ move from the deep reservoir to the surface. A large range in δ¹³C_TDIC (−21.07 to +3.65) characterises the waters circulating in the aquifers of the region and the mass and isotopic balance of TDIC allows distinguishing a discharge of 0.3 × 10⁹ mol a⁻¹ of deeply sourced CO₂ in spring waters. The total natural CO₂ discharge (2.1 × 10⁹ mol a⁻¹) is slightly less than minimum CO₂ output estimated by an indirect method (2.8 × 10⁹ mol a⁻¹), but present-day release of 5.8 × 10⁹ mol a⁻¹ CO₂ from deep geothermal wells may have reduced natural CO₂ discharge. The heat transported by groundwater, computed considering the increase in temperature from the infiltration area to the discharge from springs, is of the same order of magnitude, or higher, than the regional conductive heat flow (>200 mW m⁻²) and reaches extremely high values (up to 2700 mW m⁻²) in the north-eastern part of the study area. Heat transfer occurs mainly by conductive heating in the volcanic aquifer and by uprising gas and vapor along fault zones and in those areas where low permeability cover is lacking. The comparison of CO₂ flux, heat flow and geological setting shows that near surface geology and hydrogeological setting play a central role in determining CO₂ degassing and heat transfer patterns.  相似文献   

Geophysical investigation using resistivity and GPR methods: a case study of a lubricant oil waste disposal area in the city of Ribeirão Preto,São Paulo,Brazil     

Alexandre Lisboa Lago  Vagner Roberto Elis  Welitom Rodrigues Borges  Giovanni Chaves Penner 《Environmental Geology》2009,58(2):407-417

Geophysics has been shown to be effective in identifying areas contaminated by waste disposal, contributing to the greater efficiency of soundings programs and the installation of monitoring wells. In the study area, four trenches were constructed with a total volume of about 25,000 m³. They were almost totally filled with re-refined lubricating oil waste for approximately 25 years. No protection liners were used in the bottoms and laterals of the disposal trenches. The purpose of this work is to evaluate the potential of the resistivity and ground penetrating radar (GPR) methods in characterizing the contamination of this lubricant oil waste disposal area in Ribeirão Preto, SP, situated on the geological domain of the basalt spills of the Serra Geral Formation and the sandstones of the Botucatu Formation. Geophysical results were shown in 2D profiles. The geophysical methods used enabled the identification of geophysical anomalies, which characterized the contamination produced by the trenches filled with lubricant oil waste. Conductive anomalies (smaller than 185 Ωm) immediately below the trenches suggest the action of bacteria in the hydrocarbons, as has been observed in several sites contaminated by hydrocarbons in previously reported cases in the literature. It was also possible to define the geometry of the trenches, as evidenced by the GPR method. Direct sampling (chemical analysis of the soil and the water in the monitoring well) confirmed the contamination. In the soil analysis, low concentrations of several polycyclic aromatic hydrocarbons (PAHs) were found, mainly naphthalene and phenanthrene. In the water samples, an analysis verified contamination of the groundwater by lead (Pb). The geophysical methods used in the investigation provided an excellent tool for environmental characterization in this study of a lubricant oil waste disposal area, and could be applied in the study of similar areas.  相似文献   

U?Pb and 40Ar?39Ar geochronology of Palaeozoic units in the northern Apennines: determining protolith age and alpine evolution using the Calamita Schist and Ortano Porphyroid     

Giovanni Musumeci  Francesco Mazzarini  Massimo Tiepolo  Gianfranco Di Vincenzo 《Geological Journal》2011,46(4):288-310

In the northern Apennines, the Palaeozoic basement involved in the Late Oligocene–Middle Miocene nappe stack contains metamorphic units for which hypothetical ages have been assigned on the basis of lithological correlations with the Palaeozoic formations of the Variscan chain in Sardinia. This uncertainty concerning the age poses limitations to reconstructing the Palaeozoic stratigraphy, defining the Alpine and pre‐Alpine histories and correlations with other domains of the Variscan chain. We present the U Pb age of detrital zircon and the ⁴⁰Ar ³⁹Ar age of metamorphic muscovite for the Calamita Schist and Ortano Porphyroid, two metamorphic units of undetermined Palaeozoic age cropping out in the eastern Elba Island. The radioisotopic data allows us to: (i) define the Early Carboniferous and Middle Ordovician ages for the Calamita Schist and Ortano Porphyroid, respectively, as well as their derivation (flysch deposit and magmatic rocks); (ii) pose some constraints concerning their alpine tectonic and metamorphic histories. These new data generate a more precise reconstruction of the Palaeozoic sequence in the northern Apennines, and they document that the Palaeozoic basement involved in the alpine deformation underwent internal stacking with an inversion of the original sequence. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

Comparing models of debris-flow susceptibility in the alpine environment   总被引：12，自引：3，他引：9  

Alberto Carrara  Giovanni Crosta  Paolo Frattini   《Geomorphology》2008,94(3-4):353

Debris-flows are widespread in Val di Fassa (Trento Province, Eastern Italian Alps) where they constitute one of the most dangerous gravity-induced surface processes. From a large set of environmental characteristics and a detailed inventory of debris flows, we developed five models to predict location of debris-flow source areas. The models differ in approach (statistical vs. physically-based) and type of terrain unit of reference (slope unit vs. grid cell). In the statistical models, a mix of several environmental factors classified areas with different debris-flow susceptibility; however, the factors that exert a strong discriminant power reduce to conditions of high slope-gradient, pasture or no vegetation cover, availability of detrital material, and active erosional processes. Since slope and land use are also used in the physically-based approach, all model results are largely controlled by the same leading variables.Overlaying susceptibility maps produced by the different methods (statistical vs. physically-based) for the same terrain unit of reference (grid cell) reveals a large difference, nearly 25% spatial mismatch. The spatial discrepancy exceeds 30% for susceptibility maps generated by the same method (discriminant analysis) but different terrain units (slope unit vs. grid cell). The size of the terrain unit also led to different susceptibility maps (almost 20% spatial mismatch). Maps based on different statistical tools (discriminant analysis vs. logistic regression) differed least (less than 10%). Hence, method and terrain unit proved to be equally important in mapping susceptibility.Model performance was evaluated from the percentages of terrain units that each model correctly classifies, the number of debris-flow falling within the area classified as unstable by each model, and through the metric of ROC curves. Although all techniques implemented yielded results essentially comparable; the discriminant model based on the partition of the study area into small slope units may constitute the most suitable approach to regional debris-flow assessment in the Alpine environment.  相似文献   

Study of Shallow Low-Enthalpy Geothermal Resources Using Integrated Geophysical Methods     

Lara De Giorgi  Giovanni Leucci 《Acta Geophysica》2015,63(1):125-153

The paper is focused on low enthalpy geothermal exploration performed in south Italy and provides an integrated presentation of geological, hydrogeological, and geophysical surveys carried out in the area of municipality of Lecce. Geological and hydrogeological models were performed using the stratigraphical data from 51 wells. A ground-water flow (direction and velocity) model was obtained. Using the same wells data, the ground-water annual temperature was modeled. Furthermore, the ground surface temperature records from ten meteorological stations were studied. This allowed us to obtain a model related to the variations of the temperature at different depths in the subsoil. Integrated geophysical surveys were carried out in order to explore the low-enthalpy geothermal fluids and to evaluate the results of the model. Electrical resistivity tomography (ERT) and self-potential (SP) methods were used. The results obtained upon integrating the geophysical data with the models show a low-enthalpy geothermal resource constituted by a shallow ground-water system.  相似文献